i need PowerPoint for
the attached file (one slide for each and do not copy from the
attached file just paraphrase it)
i need'
1- background
2-functional
requirements
3-design requirements
4-testing
5-moving forward
6- summary
Attachments area
We believe that dust emissions in the aluminum crucible
cleaning process creates a hazardous work environment for customers of
….Tooling. The key issue is dust being emitted from both ends of the crucible
into the surrounding air in the facilities. Our team believes that there is a
solution to this dust dispersion that will allow the workers to perform this
cleaning task in the foundries while also maintaining safe working conditions. We
plan on working in unison with you and the ,,,, Tooling staff to develop a
solution that meets all customer expectations.
This document includes our problem statement, research
proposal and derived design criteria for the problem, along with the expected
deliverables of the project. We are very excited you have invited us to help
you solve this issue and we look forward to collaborating with you in the weeks
to come.
Objective
The team will perform
research, develop concepts, and run feasibility testing in order to develop
prototype solutions mitigating dust. Testing, analysis and enhancement will
then be performed to finish the design according to ….’s needs.
Background and Initial
Research
….Tool Technologies
offers a wide range of products in order to clean, install, plug, test and
remove tube used in different types of industries. Aluminum slag from siphon
tubes has become the major problem for many foundries, and ..t has created
technology that will remove it quicker and more efficiently than current
solutions. However, with this technology, a significant amount of dust is
created and … is seeking a way to eliminate this dust. When Aluminum ingots are
being created, a crucible is used to siphon the molten aluminum and transfer it
to a cooling station. During this transfer molten aluminum accumulates and
hardens in the siphon tube of the crucible. The current solution is to use a
long auger-like drill bit to slowly cut away the slag. …..Tool Technologies has
produced a product that removes the aluminum slag through a turbine motor much
faster and more efficiently than the auger drill. This product is a
pneumatically powered drill head that rotates to break up debris inside the
tube. The main concern with using this product is that it produces a large
amount of dust during the cleaning operation. If dust was not an issue using
this product the customers would be able to clean these crucibles quickly
without having to take them outside the foundries. This would save considerable
amounts of time. …. Tooling also currently has no direct competitors in this
market and the opportunity for sales is extraordinary. Another issue involved
in this process is that the tool needs to be fed vertically into the siphon
tube. The current hoses used are not rigid and create handling issues for the
tool operator. This problem has been partially resolved by adding a length of
rigid tubing to the tool.
Problem Statement
Customers using….
Toolings tube cleaning solutions are encountering problems with dust
dispersion. Overseas customers are experiencing difficulty cleaning aluminum
crucibles in the foundries without creating a hazardous workplace environment.
If the dust is able to be contained during this cleaning process, the workers
would save time and energy while maintaining a safe environment. Customers also
desire a more rigid form of tubing so the tool can be better handled throughout
the cleaning process.
Functional Requirements
The functional
requirements are as follows:
- Enhance
tool design or provide attachment in order to mitigate dust, while
removing aluminum and slag from siphon tubes used in aluminum foundries.
- Allow
for single operator usage
Design
Requirements
The
following are required:
·
Dust must be
eliminated as significantly as possible
·
Solution must create
no new safety risk for the operator
·
Pipe cleaning process
time must not be increased significantly
·
Power system not
affected by environment
Research efforts will be
done to quantify these requirements
Technical
Deliverables:
1. Research
The team will do initial research to further
understand the issue and begin the ideation process. This includes finding
examples of current dust mitigation solutions and creating correlations to the
tube cleaning process.
2. Decision Analysis
Multiple solutions to the problem will be
presented by the team. The team will focus on the best possible solution based
on the decision matrix. The final decision will be developed by researching the
problem and finding a formidable plan to improve product. The solution will be
consulted with experts as well as the team’s clients.
3. Technical
Illustrations
All designs presented in the decision matrix
will be accompanied by technical drawings so that all members involved can
clearly see how the design looks and operates. This will also allow team
leaders from …t to give insight on dimensions, machining processes, materials,
etc.
4. Calculations
Calculations will include (but not limited
to): suction necessary to overcome air powering tool, power requirements for facility (whether it be electrical or
pneumatic), weight and/or volume for shipping.
5. Prototyping
The team will work to create a minimal value
product of the most valid design presented by the decision matrix. The design
will then be tested in order to validated learning metrics and expert feedback
from members of ….. Tooling. Based on these metrics and feedback, a reworking
process will be initiated and this process will be repeated until the design is
complete.
6. Testing and
Analysis
The team will develop a plan, test the
prototype, and then provide analysis. The testing will involve simulating the
cleaning process of the aluminum siphon and then using the prototype to collect
dust showing the validity of the design. The team will analyze the results to
determine if the design passed all the requirements. If the results do not pass
the requirements, the team will use what was learned from testing to modify the
concept and test again.
7. Recommendations
The team will recommend a solution or the next
steps in developing a product that will successfully reduce the dust present in
the environment during cleaning. We will also provide feedback on what was
helpful and what was not regarding information/research, testing, feedback,
etc.
Solution
Presentation Contents
• Objective
• Background
• Defining
Problem
• Functional
Requirements
• Design
Requirements
• Testing
• Moving
Forward
• Summary
OBJECTIVE
qTo complete
the research, testing and analysis.
qTo develop a
prototype.
qStop dust
emission from aluminum crucible cleaning process.
qMake environment safe for workers, customers
and others.
Defining Problem
• The
problem is the aluminum and dust particles which are suspended in the transfer
tube.
• The
suspended particles of aluminum and dust mix in the surrounding environment.
• This
is dangerous and problematic for the workers in aluminum industry.
• Therefore,
the problem definition is the mechanism to be introduced to transfer the
aluminum without creating dust and making environment feasible and safe for the
workers.
• The
problem is also mixing of dust in the environment; so the mitigation is also
expected to retain dust in the tube while cleaning and transferring aluminum.
Functional Requirements
Following
are the functional requirements for alleviating dust produced while removing
remains of aluminum from tubes:
qImprove design of tool
qProvide attachments
qOnly one operator allowed for usage
Design requirements
Following are the design requirements of the process:
q Dust must be removed
qZero risk of safety for operator in the
solution
qProcess must take minimum time
qEnvironment should not affect the power system
Social Contact